ShapeCapture V6.1: continues to be the leading software package for accurate 3d measurement and modeling. ShapeCapture, is in use in over 30 countries. ShapeCapture offers the best of both worlds accurate measurement, detailed 3d modeling, and interfacing to compatible technologies.

ShapeCapture provides the capability for 3D Modeling from images, Camera Calibration, 3D Coordinate Measurement, Photogrammetry, Texture Mapping, Automatic Target Extraction and Stereo Matching.

ShapeScan SM™ The Intelligent Software to Create 3D Models and Generate Accurate Point Cloud Data from Digital Images or Structured white Light Scanning. It offers the best of all worlds, Scan it, Image it, or Do Both. The hybrid dense pixel stereo matching capabilities can produce large point cloud sets with higher accuracy than laser scanning at mid distances. Imagine this type of capability using a hand held digital camera, images are capture in an instant vs. scanning time.

You can also use use the ShapeScan camera mounting hardware for DSM dense stereo matching in fact you can cycle scan methods during the scan process. Since the cameras are registered, you can scan objects in DSM in less than a second. ShapeScan suite allows for the use of a target template for automatically registering the images, and calibration, there is no need for placing targets around any object and registering the images in this mode. The suite is bundled with PolyWorks modeler.

The ShapeScan_SM Suite is the only system available that will work with multiple scanning solutions including, Image based, Structured white Light and Laser scanning. A first for the Industry.

ShapeTexture_A™: The ShapeTexture program applies textures to polygon mesh files automatically. Polygon groups are created automatically with seam blending, the system allows for use of large image sets. It uses a photogrammetric bundle solution for registration data or IMU information. It will work with any type of scanner including all Lidar systems.

ShapeScan_SM_Scanner is our new generation scanner. It replaces the StarCam scanner and incorporates the modular features of the ShapeMoniitor system, high resolution image sensors, pixel locking, and speed. The sealed and hardened enclosure system designed for access to the vision hardware and add-in options that extend its application horizons.

The ShapeScan_SM™ scanner offers up to 5 to 11 times the point resolution of the previous StarCam system, higher accuracy and near real time rates. The ShapeScan_SM  provides rapid capture and processing of 3D digital images, supports color imaging in studio or field environments, and has a multi-camera configuration for full 360° imaging, including full body scans. The camera mounts are fully adjustable for various base lengths for scanning from .5 meters to 7 meters. So large objects can be scanned or full body scans with a one basic system.

The system allows for multi scan solutions for stationary objects and for moving objects. It will capture full data sets at .033 and .016 seconds.

Although as shown the cameras are mounted in the hardened enclosures, but you can also remove and mount the camera or any type of video rate camera to the mounting hardware in fact you can mound both the DLSR and the video rate cameras depending on you application.

The system hardware can be ordered with ShapeScan_SM_Scanner since the ShapeScan software supports all scan modes including high speed scanning. For a total solution, ShapeQuest Inc. provides full system integration, with installation, and training for ShapeCapture, ShapeTexture, ShapeScan and PolyWorks.

The ShapeScan DSLR is one of our new generation scanners. The ShapeScan_SM DSLR Scanner achieves high resolution scanning with a structured white light scanning source. It can be configured with most DSLR cameras and point resolution up to 18 million points. The system is configured automatically within the ShapeScan_SM module where you have the option to image or scan the object. Scan time ranges from .03 sec to 2 seconds to acquire millions of points. With accuracy of .025 to .100 mm

The system will work with any type of DLP projector including small handheld LED models. Also enclosed cases are available for projector and cameras.

Since the scanning ability is built into the base ShapeScan_SM system you have an option of ordering a turn key system, tripod, cameras, housing, and projector for a total solution. ShapeQuest Inc. provides full system integration, with installation, and training for ShapeCapture, ShapeTexture, ShapeScan and PolyWorks.

The mounting hardware system can also be ordered separately without cameras or projector when you place an order for the ShapeScan_SM software. The camera mounts are fully adjustable for various base lengths for scanning from .5 meters to 7 meters. The DSLR scanner can be used for stationary objects, for human faces or full body scans but should not be used for moving objects. For this you will require changing out the DSLR cameras for our locked higher frame rate camera link cameras. The ShapeScan automatically senses this and will run the data.

The mounting hardware can also be used for DSM dense stereo matching in fact you can cycle scan methods during the scan process. Since the cameras are registered, you can scan objects in less than a second. The ShapeScan suite allows for the use of a target template for automatically registering the images and auto camera calibration, there is no need for placing targets around any object and registering the images.

The ShapeScan_SM is accessible to virtually any user. Even at a lower price point, it is able to capture large amounts of data at more rapid pace and with greater ease than most competing systems.

Although you can use any type of camera, we recommend you not use small format point and shoot cameras, we recommend using DSLR cameras from Nikon or Canon or other brands that you will allow for computer control. If you are looking at using lower end cameras you might consider using a lower price, less accurate scanning software package rather than using the ShapeScan_SM suite.

PolyWorks the industry-standard point-cloud inspection and reverse-engineering software for automotive and aerospace, including processing data obtained from any short-range, mid-range, or long-range 3D scanners. PolyWorks uses high-density point clouds to measure and control the quality of castings/dies/molds.V11 software and is offered in a 32 and 64 bit version for large data sets and the use of unlimited memory. It also has a new cluster solution for meshing large point clouds over a computer network, New hole filling technology that surpasses all existing products and New improved fitting of NURBS surfaces to list a some of the new updates. PolyWorks also offers a unique reverse-engineering module that produces class A polygonal models and rapid NURBS surfaces that are the most usable in CAD/CAM/CFD/FEA software suites.

Combine digitized polygonal models and CAD models

• Dynamically construct surface patches in real time by laying down curves on polygonal models
• Maintain perfect curvature/tangent continuity (G2/G1) in areas where patch topology is rectangular
• Create N-sided patches and T-junctions in areas where multiple master surfaces blend 
• Benefit from the enhanced surface smoothness of the new PolyWorks V11 surface-fitting engine

ShapeMonitor is a turnkey system that allows for measuring objects in real time. The system comprises a high speed computer, frame grabber, and dual digital cameras for data acquisition and a target projector.  The system allows for easy configuration for different camera types such as high speed cameras.